subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Cruise Control - `Loctite' Equipped Screw Removal|Page 3802 > < Cruise Control - `Loctite' Equipped Screw Removal
Page 2
background image

PROCEDURE:

1.

Carefully heat the head of the screw with a pencil tip soldering iron (50 watts max.). After heating for approximately one minute, use a Phillips
head screwdriver to carefully unscrew the screw.

CAUTION: Do not damage the screw head.

2.

Repeat Step 1 - heating and unscrewing - as necessary - until the screw is fully removed.

CAUTION: Do not touch other vehicle parts with the hot soldering iron.

MFG. FOR SUBARU OF AMERICA BY SPECIFIC CRUISE SYSTEMS, INC.

Cruise Control - `Loctite' Equipped Screw Removal|Page 3802 > < Cruise Control - `Loctite' Equipped Screw Removal